Electronic Control Products

SBC-002A

Higher output type in SBC series
Output current: Max.60A
Charge auxiliary battery while preserving start battery. Vital item when adding extra battery

Very effective and efficient system for charging two batteries from one alternator.

Alternator is charging the start battery in your car and boat. If you want to use the same start battery as a power supply for additional electric appliances such as TV, refrigerator, microwave and fishfinder, and those electric consumption are so large, the start battery may get very low charged and the engine of your car or boat may not be able to start in the end. In order to solve this problem, you can bring an auxiliary battery to help the start battery. However, it is not enough because two batteries are equally charged and the start battery may not be charged enough to start engine. If you use this SBC-002 and an auxiliary battery at same time, SBC-002 separates the start battery and the auxiliary battery and give the priority to start battery for charging from alternator. As a result, the start battery is always preserved its charging level enough, and you can avoid the risk of no starting engine and enjoy using additional electric appliances.

・ The protective circuit for start battery preserving
・ Easy installation
・ For both 12V and 24V (automatic changeover)
・ Light-weight and compact design
・ Interlock with ACC
・ Indication of abnormity such as heat generation by flashing cycle of LED
SBC-002A

Click To Enlarge Image

Product Specification

Model SBC-002A
Product dimensions 188(W)×58(H)×174(D)mm
Product weight 1.0kg
Rated input voltage 12V / 24V battery
Output current MAX60A
Max. operating voltage 30V
Operating temp. range -20℃~+60℃
Anti-vibration JIS D 1601 45 degree
Water-proof No water-proof
No load current 12V Start batt. below 25mA
24V Start batt. below 35mA
Functions ◎Low voltage protection for start battery

For 12V battery
1) Operated by power-switch ON / About 12.5V
(Reset about 13V)
2) Operated by Option / About 11.5V
(Reset about 12.0V)

For 24V battery
1) Operated by power-switch ON / About 25.5V
(Reset about 26V)
2) Operated by Option / About 23.5V
(Reset about 24V)

◎Over voltage protection for main battery
For 12V battery / About 18V
For 24V battery / About 32V

◎Electric current limit: 60A

◎Indication of battery condition by LED
Charging current / turn off at about 3A
Current control method PWM
Product Search
Free Word Search
Select Product Category
Electronic Control Products